| Specification/Model | Unit | |||||||
|---|---|---|---|---|---|---|---|---|
| YPL-170 | YPL-200 | |||||||
| Usage | - |
Vertical or Horizontal
|
||||||
|
Locking Method (Hydraulic)
|
kg/cm² | 5~7 | ||||||
|
Dial Size
|
mm | φ170 | φ200 | |||||
| Thru Diameter | mm | φ40H7 | ||||||
| Dial Center Positioning Diameter | mm | φ50H7 | ||||||
| Center Height | mm | 135 | 160 | |||||
| T-slot Width | mm | 12H7 | ||||||
| Location Button | mm | 14H7 | 18H7 | |||||
| Servo Motor Model | (FANUC) | - | α4i/β8i | |||||
| (Mitsubishi) | HF-104 | |||||||
| Maximum Speed | r.p.m | 33.3 | ||||||
| Gear Ratio | - | 1/90 | ||||||
| Minimum Setting Unit | deg | 0.001° | ||||||
| Split Accuracy | sec | 20 | ||||||
| Repeatability | sec | 4 | ||||||
| Clamping Torque | N·m | 200 | ||||||
| Allowable Torque of Worm Gear | N·m | 170 | 260 | |||||
| Allowable Load | Vertical | kg | 85 | |||||
| Horizontal | 160 | |||||||
| Usage of Tailstock | ||||||||
| Allowable Cutting Force (Locked) |
F
|
N | 14500 | |||||
FXL
|
N·m | 200 | ||||||
FXL
|
N·m | 1020 | ||||||
| Allowable Inertia |
J = W·D²/8
|
kg/cm² | 0.52 | 0.62 | ||||
| Net Weight (without Motor) | kg | 42 | 50 | |||||
If you have any enquiry about quotation or cooperation,please feel free to email us at shine@yunwuchuck.cc or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.
