| Specification/Model | Unit | (YH Increased Locking Torque for Hydraulic Brake Models） | ||||||
|---|---|---|---|---|---|---|---|---|
| YP-125 | YP-170 | YP-200 | ||||||
| Usage | - |
Vertical or Horizontal
|
||||||
|
Locking Method (Pneumatic)
|
kg/cm² | 5~7 | ||||||
|
Locking Method (Hydraulic)
|
- | 15 | ||||||
| Dial Dimension | mm | φ125 | φ170 | φ200 | ||||
| Thru Diameter | mm | φ15H7 | φ40H7 | |||||
| Dial Center Positioning Diameter | mm | φ22H7 | φ50H7 | |||||
| Center Height | mm | 110 | 135 | 160 | ||||
| Plate T-slot Width | mm | 8H7 | 12H7 | |||||
| Location Button | mm | 14H7 | 18H7 | |||||
| Servo Motor Model | (FANUC) | - | α2i/β4i | α4i/β8i | ||||
| (Mitsubishi) | HF-105 | HF-104 | ||||||
| Maximum Speed | r.p.m | 44.4 | 33.3 | |||||
| Gear Ratio | - | 1/45 | 1/90 | |||||
| Minimum Setting Unit | deg | 0.001° | ||||||
| Split Accuracy | sec | 45 | 20 | |||||
| Repeatability | sec | 4 | ||||||
| Clamping Torque | N·m | 160 | 200 | |||||
| Allowable Torque of Worm Gear | N·m | 82 | 170 | 260 | ||||
| Allowable Load |
Vertical
|
kg | 50 | 85 | ||||
Horizontal
|
100 | 160 | ||||||
Usage of Tailstock
|
||||||||
| Allowable Cutting Force (Locked) |
F
|
N | 10000 | 14500 | ||||
FXL
|
N·m | 115 | 200 | |||||
FXL
|
N·m | 430 | 1020 | |||||
| Allowable Inertia |
J = W·D²/8
|
kg/cm² | 0.2 | 0.52 | 0.62 | |||
| Net Weight (without Motor) | kg | 32 | 42 | 50 | ||||
If you have any enquiry about quotation or cooperation,please feel free to email us at shine@yunwuchuck.cc or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.
